Aquabot Pool Rover Junior REVIEW

Aquabot Pool Rover Junior

Aquabot Pool Rover Junior







Water Mixing





  • Simple to use
  • Hose-free
  • No hose tangling problems
  • No complex programming
  • 2-hour automatic shut off timer


  • Cleans floors only
  • Unable to climb walls
  • Works poorly in non-flat bottoms
  • Material easily damaged
  • Unable to clean pool surface

The Aquabot Pool Rover Junior is a perfect addition to the line-up of amazing Aqua Products. It is designed to scrub and vacuums out leaves, algae, dirt, and other unwanted contaminants up to 2-micron in any flat surfaced above-ground pool with the help of a secure 24-volt pump push.

It comes with a durable floating cable of 40-feet cable that comes in handy in cleaning hard to reach areas from the power supply. You don’t have to worry about staying it on while you are away because it comes with a 2-hour automatic shut off that allows you to save energy.

Even though Aquabot Pool Rover Junior is designed for flat bottomed-pools, it has extra wide wheels which are useful in rolling over deep footprints. It also does not have any problem with ripples and it cleans the whole pool even with bumps thanks to its wide wheels.

It is easy to use and does not need any complex programming to start using. It’s as simple as turning the power button on, dropping it in your pool and it is ready to go.

Just relax while waiting for the Aquabot Pool Rover Junior to do the work. Although, there is a need to lock the pin at the front axle to avoid cable to twist while the machine is working.

This sometimes overlooked move is necessary to achieve maximum performance by the cleaner. It is not much of a hassle but forgetting to perform this may lead to poor operations.

It is lightweight and relatively smaller compared to other robotic pool cleaners. When you want to pull it out off your pool, expect it to be heavier because it has already collected enough dirt and water.

The trick is to pull the cord gently and allows it to slightly float while grabbing the side handles making sure it is in level. Customers’ usual complain is when pulling it up sideways which leads to the flaps to open causing the collected dirt to be dumped back.

Aquabot Pool Rover Jr

Aquabot Pool Rover Junior
Key Features & Performance

Product/Pool Features:
For Above-Ground Pools
Shape: Rectangle, Lap, Kidney, L-Shape, Round, Oval
Surfaces: Vinyl, Gunite/Concrete Fiberglass, Tile
Profile: Flat Bottom
Input Electrical Requirements: 120 VAC/60Hz
Power Consuption: 180 Watts
Dimensions: 18 1/2" X 18" X 11"
Weight: 10.6 lbs
Non-Marring Wheels
Cable Length: 40'
Floor Only
2 & 3 hour timer
Water Mixing Capability
70 Gallons per Minute
Filter Type
Fine Bag (2 Microns)
Bottom Loading
1 Year, 100%

Aquabot Pool Rover Jr  Aquabot Pool Rover Jr 3  Aquabot Pool Rover Jr 4


Leave a Reply

Your email address will not be published. Required fields are marked *